Project Leaders

Musco Buckley Lockwood

Full resumes follow this image section… be sure to scroll down to view our staff’s credentials.

 

Musco Engineering Project Team Leaders…

 

Michael V. Musco – Principal Engineer (General Resume)

Our Principal Engineer has more than forty-five years of combined experience in building industrial and facility engineering. This experience has been earned as a Consulting Engineer, Facility Planner, System Integrator, Construction Manager, Code Official in Mechanical and Electrical installations. This depth of experience enables the Principal to provide state-of-the-art technical service in an efficient, economical and practical manner.

Experience:

  • Forty-five years experience in industrial, commercial and material handling areas incorporating facility and electrical engineering
  • Thirty-five years experience in managing engineering teams
  • Twenty-five years experience in project management
  • Resident Engineer for building and facility construction projects
  • Field and Start-up Engineer on numerous compounding facilities
  • Code research, OSHA review and life safety systems evaluations & recommendations
  • Twenty-five years experience in life safety and security systems
  • Twenty years experience in Code Inspections (Electrical and Mechanical Installations)
  • Building Official for Electrical and Mechanical Installations
  • CT Codes and Standards Committee (Member since 2002)

Recent Notable Building/Project Experience:

  • Sacred Heart University – Various Projects
  • Fairfield Community Theatre Project – Fairfield
  • Town of Orange – Various School Projects
  • Metro North Railroad, DOT Projects – Old Greenwich, Bridgeport, Springdale, Stratford Stations
  • BIC – 500 Bic Drive Milford – Multiple Tenant Separation Projects
  • CES 25 Oakview Drive Fire Alarm & 7 Cambridge Drive Tenant Fit-out – Trumbull
  • City of Stamford Fire Alarm Projects – Stillmeadow, Scofield, KT Murphy
  • 25 & 35 Springside Avenue – Apartment Buildings – New Haven
  • Stamford Hospital (New 12 Story Bldg.) Code Review & Electrical Inspections
  • URBY Parcel 38 Phase I & II – One Greyrock Place – Stamford – 3rd Party Code Review

Registrations and Memberships:

  • State of Connecticut Codes and Standards Committee Member
  • Licensed to practice Professional Engineering in: Connecticut, Florida, Massachusetts, New York, North Carolina, Pennsylvania, Tennessee, and New Jersey.
  • Licensed as State of Connecticut Mechanical Inspector (Heating, Plumbing and Fire Protection)
  • Licensed as State of Connecticut Electrical Inspector
  • Licensed Electrical Unlimited Contractor in the State of Connecticut.
  • Member, American Society of Heating, Refrigerating and Air Conditioning Engineers (ASHRAE)
  • Past Senior Member of Instrument Society of America (ISA)
  • Member, National Fire Protection Association (NFPA)
  • Member, National Society of Professional Engineers (NSPE)
  • Member, International Association of Electrical Inspectors (IAEI)
  • Member, International Code Council (ICC)
  • Member, Illuminating Engineering Society of North America (IESNA)
  • Member, Connecticut Small Contractors Set-Aside Program
  • Connecticut Building Officials Association (CBOA)
  • Connecticut Fire Marshal Association (CFMA)
  • National Fire Protection Agency (NFPA)

Education:

  • Bachelor of Science, Indiana Institute of Technology

Continuing Educations:

  • Seminars on Code Changes by NFPA
  • ICC Code update Seminars in Building Codes
  • ICC Code update Seminars in Mechanical Codes
  • ICC Code update Seminars in Plumbing Codes
  • 60 Hours in Class Training for License Renewals (Per Renewal Cycle)
  • ASHRAE Courses on Data Center Efficiencies
  • IECC 2009 / ASHRAE 90.1 2007 Curriculum Seminar – 4 days
  • Yearly Continuing Education for Electrical and Mechanical State Inspector Licenses

References Available Upon Request

 

Michael V. Musco, P.E  – (3rd PARTY CODE REVIEW, INSPECTIONS, AND LEGAL ASSISTANCE RESUME)

Our Principal Engineer has more than forty-five years of combined experience in building industrial and facility engineering. This experience has been earned as a Consulting Engineer, Facility Planner, System Integrator, Construction Manager, Code Official in Mechanical and Electrical Installations.

Experience:

  • Forty-five years experience in industrial, commercial and material handling areas incorporating facility and Electrical engineering
  • Thirty-five years experience in managing Engineering teams
  • Twenty-five years experience in Project Management
  • Resident Engineer for building and facility construction projects
  • Field and Start-up Engineer on numerous compounding facilities
  • Code research, OSHA review and life safety systems evaluations & recommendations
  • Over twenty-five years experience in Life Safety and Security Systems
  • Twenty years experience in Code Inspections (Electrical, Mechanical, and Life Safety Installations)
  • Building Official for Electrical and Mechanical Installations in Connecticut.
  • CT Codes and Standards Committee (Member since 2004)

Recent Notable Building/Code Inspections and 3rd Party Code Reviews:

  • UBS Group Corporate Services/Americas – Stamford, CT
  • Rogers Inter-District Magnet Extension – Stamford, CT
  • SoNo Residence Inn #9770 – South Norwalk, CT
  • New Police Facility – Bethel Police Department, Bethel, CT
  • Branford Community & Senior Center – Branford, CT
  • Francis Walsh Intermediate School and Central Offices, Branford, CT
  • CT Orthopedic Specialists Second Floor Residential Care Home, Branford, CT
  • Stamford Hospital Regional Center for Health, Stamford, CT
  • Stamford Hospital (New 12 Story Bldg.) Code Review & Electrical Inspections, Stamford, CT
  • URBY Parcel 38 Phase I & II – One Greyrock Place – Stamford, CT
  • Sally’s Apizza – Fairfield, CT
  • Dunkin Donuts at Bradley Airport – Windsor Locks, CT
  • True North – Stamford, CT
  • Johns – Stamford, CT
  • Parker Place Apartments Expansion – Wallingford, CT
  • Amazon Facility – Wallingford, CT
  • Rowland Technologies – Wallingford, CT

State of Connecticut Codes and Standards Committee Member:

  • Licensed to practice Professional Engineering in: Connecticut, Florida, Massachusetts, New York, North Carolina, Pennsylvania, Tennessee, and New Jersey.
  • Licensed as State of Connecticut Mechanical Inspector (Heating, Plumbing and Fire Protection)
  • Licensed as State of Connecticut Electrical Inspector (Life Safety Systems)
  • Licensed Electrical Unlimited Contractor in the State of Connecticut.
  • Member, American Society of Heating, Refrigerating and Air Conditioning Engineers (ASHRAE)
  • Past Senior Member of Instrument Society of America (ISA)
  • Member, National Fire Protection Association (NFPA)
  • Past Member, National Society of Professional Engineers (NSPE)
  • Member, International Association of Electrical Inspectors (IAEI)
  • Member, International Code Council (ICC)
  • Past Member, Illuminating Engineering Society of North America (IESNA)
  • Connecticut Building Officials Association (CBOA)
  • Connecticut Fire Marshal Association (CFMA)
  • National Fire Protection Agency (NFPA)

Legal Assistance & Research:

Provide assistance to the Legal Profession in numerous instances including but not limited to:

  • Investigation of accidents with respect to code deficiencies.
  • Investigation of accidents from electrical shock.
  • Specific Code research.
  • Expert Witness testimony.
  • Depositions and Deposition reviews.
  • Assisting the legal field with review of case testimony.
  • Planning & Zoning Area Lighting Requirements.

Education:

  • Bachelor of Science Degree, Indiana Institute of Technology

Continuing Educations:

  • Seminars on Code Changes by NFPA
  • ICC Code update Seminars in Building Codes
  • ICC Code Seminars on Mechanical Codes
  • ICC Code Seminars on Plumbing Codes
  • 60 Hours in Class Training for License Renewals (Per Renewal Cycle)
  • Yearly Continuing Education for Electrical and Mechanical State Inspector Licenses
  • Yearly Continuing Education for Contractor License

 

Stephen M. Korik Jr. – Senior Project Designer

Our Senior Project Designer has more than twenty years of combined experience in field and electrical design. This experience has been earned from design to field applications on institutional, educational, commercial and residential building projects. This depth of experience enables to provide our clients state-of-the-art technical service in an efficient, economical and practical manner.

Experience:

  • Twenty years experience in design for renovation and new construction projects
  • Twelve years experience in field observation and inspections
  • Twelve years experience in project coordination and design
  • Ten years experience in code review and research

Design Experience:

  • Institutional Facilities
  • Health Care Facilities
  • Educational Facilities
  • Residential Housing
  • Multi-unit Complexes
  • Libraries and Media Centers
  • Educational and Clinical Laboratories
  • Parks and Recreation Areas
  • Commercial Projects
  • Industrial Projects
  • Arc Flash Calculations

Additional Experience:

  • Life Safety Systems/Fire Alarm Systems
  • Power Distribution Systems
  • Lighting Design and Building Energy Calculations
  • Data/Server Room Systems including Network Equipment and Wiring Methods
  • Security Systems (Overt and Covert)
  • Project Code Review, Research & Investigation
  • Field Observation & Inspections
  • Generator design Installation
  • Generator Training (Generac)
  • Back-up Power Systems including Mission Critical Requirements

Education:

  • Graduate: Porter & Chester Institute – Stratford, CT
  • Computer Design work from actual construction projects and situations including electrical, mechanical, structural, plumbing, HVAC, and civil/site training
  • Continuing Education: NFPA 70 National Electric Code Seminar Training & related State of CT Approved Codes

 

Lawrence R. Gooch

Our Professional Engineer has more than thirty years of combined experience in building industry and facility engineering. This depth of experience enables the Professional Engineer to provide state-of-the-art technical service in an efficient, economical and practical manner.

Experience:

  • Thirty years experience in engineering design and management of all engineering disciplines
  • Thirty years experience in project management from front-end conceptual design to detailing engineering, construction and installation supervision and pre-commissioning start-up
  • Thirty years experience in process design, mechanical design, instrumentation and control, industrial ventilation
  • Thirty years experience in rubber and plastics compounding, pelletizing, calendering and molding operations, manufacturing facilities and industrial/consumer products

Building Experience:

  • Technical Laboratories
  • Manufacturing Facilities
  • Plot Plan Facilities
  • Pharmaceutical Manufacturing Facility
  • Bulk Material Handling Systems
  • Industrial Equipment Controls
  • Material Handling Systems
  • Process and System Integration
  • Package Operations
  • Pumping Stations for the Utility Industry
  • Post Compounding Material Handling Systems

Additional Experience:

  • Published and presented papers on:
    ·  “Compounding and Calendering Polymer Bonded Magnetic Materials”
    ·  “Fundamentals of Setting up a Modern Mixing Facility”
    ·  “The Modern Tire Cord Calender”
    ·  “Upgrading Older Calenders for Improved Performance – Selecting Calendars for Upgrading”
    ·  “Selecting and Specifying Feeding and Weighing Equipment for Intensive Internal Batch Mixers”
    ·  “Calendering Coated Fabrics and Tapes”
    ·  “Rubber Mill Applications in Compounding Operations and Material Preparation –
    Upgrading Older Mills for Improved Operation and Safety”
    ·  “The Wire Cord Calender and Wire Cord Calendering”

Registrations and Memberships:

  • Licensed to practice Professional Engineering in Connecticut, New Hampshire, Tennessee.
  • Member, National Society of Professional Engineers (NSPE)
  • Senior Member, American Society of Mechanical Engineers
  • Senior Member, Society of Plastics Engineers
  • Member, Rubber Division, American Chemical Society
  • Member, Technical Association of the Pulp and Paper Industry (TAPPI)

Education:

  • Bachelor of Science, Mechanical Engineer, Worcester Polytechnic Institute
  • Masters of Science, Metallurgy, Stevens Institute of Technology
  • Masters of Business Administration, University of New Haven

Continuing Education:

  • U.S. Army Engineer Officer Advance Course
  • National Security Management – Industrial College of Armed Forces
  • NYU – Plastics Compounding
  • Emhart Management Development Course
  • Project Management Seminars
  • Effective Time Management
  • ASME Dimensioning Practices

 

Pieter Moen, BSME, MBA, LEED AP

Pieter Moen is the firms lead energy and sustainability consultant and has over 25 years of engineering experience.

Professional Exp[erience::

  • 25 Years

Education:

  • 1972 HTS, Utrecht, Holland, BSME,
  • 1977 Univ. of New Haven, MBA,
  • 2009 LEED AP

SUMMARY OF EXPERIENCE:

After having held several positions in engineering, planning, sales and marketing, Mr. Moen has over the last 18 years working as an independent consultant, focusing work at airports. In this capacity, he has worked as a design consultant and owner’s representative for many projects including new construction, expansion of existing facilities, alterations to tenant offices. This included the design, implementation and commissioning of large material handling systems and commissioning of systems associated with tenant spaces such as sprinkler systems, HVAC, security and access systems.

Mr. Moen has extensive experience in the commissioning of industrial systems, having been involved in the design, specifying and commissioning of over 11 large material handling systems, both commercial and military. These projects typically are multi-year projects from inception to beneficial occupancy.

PARTIAL LIST OF RELEVANT EXPERIENCE:

 

Japan Airlines Cargo – JFK Renovation office and hangar Owner Representation, commissioning.
NCA-JFK Facility New Construction 120,000 Sqft. cargo terminal with material handling system Design consultant, owner’s rep, commissioning of material handling System
NCA-JFK, MHS expansion Expansion of Material Handling System, Design consultant, owner’s rep, commissioning of material handling System
NCA-SFO: North Field Cargo Complex New Construction, 55,000 Sqft warehouse with Material Handling System Design consultant, owner’s rep, commissioning of material handling System
NCA-LAX Existing Construction Renovation, new Material Handling System Design consultant, owner’s rep, commissioning of material handling System
Continental-EWR New Construction, 140,000 Sqft. Cargo facility with MHS Design consultant, owner’s rep, commissioning of material handling System
Continental-JFK New Construction, 50,000 Sqft warehouse +offices and Material Handling System Design consultant, owner’s rep, commissioning of material handling System
Lufthansa JFK / Building 23 New Construction, 120,000 Sqft warehouse with offices and Material Handling System MHS Consultant / Owners rep, construction services, commissioning
Cargo Service Center JFK / Building 21 New Construction, MHS, Cooler, Guard office MHS Consultant / Owners rep, construction services, commissioning
Singapore Airlines/ Building 21 Demising tenant offices Conceptual Design, Commissioning of Systems
Alliance Airlines / Building 21 Demising tenant offices Conceptual Design, Commissioning of Systems
Lufthansa/ Qantas Office Building 23 Demising tenant office Conceptual Design, Commissioning of Systems

 

Paul J. Estok III, LC – Electrical Project Leader 

Our Electrical Project Leader has over forty years of extensive achievements in engineering, marketing, product manufacturing and in secondary service market with twenty plus years of proven records of accomplishment in client satisfaction. During the past 11-year period: responsible for a multitude of projects requiring SD, DD, CD and CA services. Duties: design of electrical services, power, IT-data/tel, interior / exterior lighting & controls, fire systems and EV charging stations. Duties include participating and/or leading client through P&Z design reviews and approvals, interfacing with field personnel, troubleshooting, developing electrical designs and programs, and providing timely documentation packages.

Experience:

  • Engineering Design / Project Management experience of all engineering disciplines.
    • Thirty years’ experience in product design, manufacturing, sales and service of lighting fixtures and optical systems.
    • Five plus years’ experience with Intertek / ETL product listing including LM 79 & 80, UL 1598 & 8750 requirements.
    • Ten plus years’ experience in project engineering from design concepts to construction / installation and commissioning.

Recent Notable Building/Project Experience:

  • High School Berlin, CT – Lighting, Fire Protection & Power design – 275,000 SF.
  • Renovation / Corporate Law Offices Hartford, CT – Lighting, Fire Protection & Power design – 18,000 SF.
  • Renovation / Executive Offices, NYC, NY – Lighting, Fire Protection & Power design – 18,000 SF.
  • Renovation / Retail Branch (Banking) – Boston, MA – Lighting, Fire Protection & Power design – 4000 SF.
  • Renovation / Library Branch West Hartford, CT – Lighting, Fire Protection & Power design – 8000 SF.
  • Hospital Parking Employee Garage Hartford, CT – Lighting, CATV, Fire Protection & Power design – 1200 parking spots / 9 levels.
  • EV (Electrical Vehicle) design / construction for the Parking Authority in New Haven (numerous).
  • New Haven Parking Garages, lighting & control upgrades to public parking garages (numerous).
  • Lighting & controls upgrades to public & private stadiums (baseball, football / soccer / lacrosse fields – numerous).
  • Lighting, Power, Wi-Fi, Camera upgrades to municipal parks and gathering areas (numerous).

Registrations and Memberships:

  • NCQLC (National Council on Qualifications for Lighting Professionals
    • Certified Lighting Professional
  • IESNA (International Engineering Society of North America)
    • Emeritus, Past Chapter President (WNEIES)
    • Committee member: prepared the IES DG 29-11 Design Guide: Commissioning Process Applied

to Lighting and Control Systems.

Education:

  • UNIVERSITY OF NEW HAVEN West Haven, Connecticut.
  • UNIVERSITY OF WISCONSIN Milwaukee, Wisconsin.
  • WORCESTER POLYTECHNIC INSTITUTE Worcester, Massachusetts.
  • WATERBURY STATE TECHNICAL INSTITUTE Waterbury, Connecticut.         
  • LIGHTING ANALYSTS Littleton, Colorado
    • AGi32 – Program Certified (Illumination Engineering Software)

Continuing Education:

  • Seminars / classes for NCLQL Certification (18 hours per renewal cycle).
  • IECC Code update seminars.
  • Attendance of local & regional seminars / trade shows.